UV-link AP03 Acrylic copolymer ADD APT Acrylics/ Acrylates SEALANT ADD APTâ UV-Link AP 03 is a low viscosity UV-curable pure Acrylic emulsion, especially designed for high quality Crack Bridging (CB) systems (AFNOR P84402). It is a copolymer of Acrylic Monomers, containing a UV-curable additive The emulsion is stable to the addition of pigments and coalescing solvents and may be made more thixotropic by the incorporation of a suitable gelling agent The polymer has elastomeric properties and excellent resistance to water and alkalis. Due to its crosslinking ability under UV/daylight, it will avoid the so undesirable dirt pick-up characteristics associated with low Tg polymers i.e. it shows low dirt pick-up In (CB) systems it shows very good performance with regards to dynamic and static cracks which could occur in new or renovated concrete buildings or other structure. It is designed for areas where the AFNOR norms P8440-1,-2,-3,-4 are required. It shows very good Elongation and tensile Strength even at severe circumstances like subfreezing temperatures ( < 0 °C). Acrylic copolymer emulsion containing UV-curable additive. Used for high quality Crack Bridging (CB) systems (AFNOR P84402). Possesses low viscosity, stability towards addition of pigments and coalescing solvents, very good resistance to water and alkalis, low dirt pick-up, very good performance with regards to dynamic and static cracks and very good elongation and tensile strength even at severe circumstances like subfreezing temperatures ( < 0 °C).