Ancamide 2424 Air Products Crosslinking / Coupling / Curing Agents >> Amines /Amides Epoxy (EP) Ancamide 2424 curing agent is a high-performance, modified polyamide optimized for use with liquid epoxy resins in two-component structural adhesives. The product offers a number of advantages in ambient and heat-cured adhesives, particularly where rapid development of adhesive strength is of important. Ancamide 2424 combines the resiliency of traditional polyamides with state-of-the-art amine technology to produce a uniquely versatile curing agent for adhesive applications. Special features include increased reactivity versus conventional polyamides, enhanced low temperature cure, 100% solids and 3 hours thin film set at 77 °F. Rapid development of adhesive strength due to increased reactivity Expanded working temperature range for 2K epoxies due to enhanced low temperature cure Excellent adhesion to metal and plastic substrates Reduced or eliminated need for costly accelerators Excellent water soak and environmental resistance DOT noncorrosive Two-component epoxy adhesives for metal or plastic bonding Two-component structural adhesives where rapid development of handling strength is a key requirement High-performance modified polyamide curing agent optimized for use with liquid epoxy resins in two-component structural adhesives. Can be used in two-component epoxy adhesives for metal or plastic bonding and in two-component structural adhesives. Provides rapid development of adhesive strength due to increased reactivity, expanded working temperature range for 2K epoxies due to enhanced low temperature cure, excellent adhesion to metal and plastic substrates, reduced or eliminated need for costly accelerators, excellent water soak and environmental resistance, DOT noncorrosive. Recommended Use Level(phr, EEW=190): 60