Epalloy 7138 Modified bisphenol A resin CVC Epoxide (EP) >> Bisphenol A based ADHESIVE EPALLOY ® 7138 Low Viscosity Non-Crystallizing Modified Bisphenol A Resin EPALLOY 7138 is a very low viscosity non-crystallizing modified Bisphenol A resin which combines low hydrolyz-able chlorides with a high degree of reactivity and good chemical resistance. It is compatible with all standard cura-tives and most resin systems and solvents. EPALLOY 7138 is excellent for 100% solids coatings and trowelable floorings requiring room temperature, cure and chemical resistance to concentrated acids and aggressive solvents. Its exceptionally low hydrolyzable chlorides make it the preferred material for electronic encapsulants and laminates. EPALLOY 7138 is an excellent base resin for low VOC coatings with higher temperature and chemical resistance versus conventionally diluted resins. Cure speeds are also not reduced like typical low viscosity Bisphenol A resins or those modified with reactive diluents. High Temperature Encapsulants/Adhesives High Temperature Room Curable Adhesives Chemical Resistance Coatings Viscosity Modifier for Epoxy Novolacs Primary Flooring Resin for High Chemical Resistance Grouts and Concrete Very low viscosity, non-crystallizing modified bisphenol A resin. Used in high temperature and high temperature room curable adhesives. Provides low hydrolyzable chlorides, high degree of reactivity, good chemical resistance, and compatibility with all standard curatives, most resin systems and solvents. Can be used as a viscosity modifier for epoxy novolacs.