Epalloy 8240 Epoxy phenol novolac resin 28064-14-4 CVC Epoxide (EP) >> Phenol & Cresol (Novolacs) ADHESIVE >> Hot-melt EPALLOY ® 8240 Low Viscosity Epoxy Phenol Novolac Resin EPALLOY 8240 is a very low viscosity epoxy phenol no-volac resin with low hydrolyzable chloride content and a high degree of reactivity. It is non-crystallizing and compatible with all standard curatives and most resin sys-tems and solvents. Formulations based on EPALLOY 8240 exhibit outstanding chemical resistance. 8240 is recom-mended for use in room temperature cure, 100% solids coatings and trowelable flooring formulations. Improve-ments in resistance to concentrated acids and aggressive solvents will occur. 8240's exceptionally low hydrolyzable chlorides make it the preferred material for electronic en-capsulants and laminates where higher temperature resis-tance is required. Blends of EPALLOY 8240 with standard epoxidized Bisphenol A based resins are an excellent way to impart resistance to crystallization. These blends will exhibit supe-rior cured properties compared to conventional diluted DGEBA resins. Primary Flooring Resin Providing Improved Chemi-cal resistance Chemical Resistant Tank Linings Viscosity Modifier for Epoxy Novolacs High Temperature Resistant Encapsulants/Adhesives Conductive Adhesives Prepregs and Composites Non-crystallizing, very low viscosity epoxy phenol novolac resin. Used in high temperature resistant and conductive adhesives. Provides low hydrolyzable chloride content, high degree of reactivity, outstanding chemical resistance and compatibility with all standard curatives, most resin systems and solvents. Can be used as a viscosity modifier for epoxy novolacs and bisphenol A resins. Recommended for use in room temperature cure.