Omicure U-415 Methylene bis (phenyl dimethyl urea) 10097-09-3 CVC Catalysts / Accelerators / Vulcanizing agents Epoxy (EP) ADHESIVE OMICURE ® U-415 Technical Grade of Methylene Bis (Phenyl Dimethyl Urea) OMICURE U-415, an aromatic substituted urea, is intended for use as a latent accelerator for the dicyandiamide cure of epoxy resins. The addition of OMICURE U-415 to epoxy/ dicy formulations produces shelf stable one part products which cure in shorter times and/or at lower temperatures. U-415 is a lower cost mixed isomer version of OMICURE U-52. Of the CVC substituted ureas, methylene bis (phenyl di-methyl urea) provides the best combination of acceleration, long shelf life and maintenance of cured properties in dicy cured DGEBA. However, formulations containing U-415 have shorter room temperature shelf lives and cure some-what slower than those containing OMICURE U-52. Suggested use levels of OMICURE U-415 in DGEBA/DICY are < 5 phr. At these levels curing can be accomplished in about eighty minutes at 100°C and in less than five minutes at temperatures > 150°C. Cure times and shelf lives are dependent on the composition of the formulated product and your particular end application. Some of the factors which can effect shelf life are formulation ingredients and compounding parameters. Ingredients in which OMICURE U-415 is insoluble at processing and storage temperatures will enhance overall storage stability. OMICURE U-415 can be incorporated into your formulation concurrent with the dicy addition. As a latent accelerator in the dicyandiamide cure of epoxy resins used in: Adhesives Powder Coatings Prepregs Encapsulation Reinforcements Aromatic substituted urea. Used as a latent accelerator in the dicyandiamide cure of epoxy resins in adhesives. Reduces time and temperature of curing. Provides good acceleration, long shelf life and maintenance of cured properties in epoxy/dicy formulations. Use level : <5 phr.