Uraplast 525 Tri-alkyl trimellitate based on linear C8-C10 alcohols DSM Plasticizers >> Trimellitate Polyvinyl Chloride (PVC) ADHESIVE Uraplast Polymeric Plasticizers Do you manufacture soft PVC products that need to meet high demands with regard to migration, extraction, UV and heat resistance? Uraplast polymeric plasticizers are capable of meeting these demands. DSM Composite Resins is a leading European supplier of polymeric plasticizers. We offer a comprehensive range of plasticizers for PVC, elastomers, adhesives, coatings and other applications. Phthalic acid based polymeric plasticizers are resistant to water and have a high resistance to oil and fat. Adipic acid based polymeric plasticizers are highly resistant to oil and fat and perform very well in outdoor applications because of their UV-resistance. The excellent properties of polymeric plasticizers make them the material of choice for contact with foodstuffs, beverages and chemicals, as well as for temperature and stain resistant applications. Uraplast 525 is a low viscous tri-alkyl trimellitate plasticiser, based on linear C8-C10 alcohols. Uraplast 525 is a trimellitate plasticiser for heat resistant cables and construction foils. Uraplast 525 is also suitable for self adhesive foils, tarpaulins and artificial leather. Uraplast 525 has a very low viscosity and colour. The volatility from PVC of this trimellitate is very low. PVC plasticised with Uraplast 525 has excellent water resistance, heat resistance and very low temperature flexibility. Tri-alkyl trimellitate based on linear C8-C10 alcohols. Used as a PVC polymeric plasticizer for self adhesive foils. Possesses very low viscosity and colour. Provides very low volatility and temperature flexibility and very good water and heat resistance.