Uraplast S 5640 Based on adipic acid DSM Plasticizers >> Adipate Polyvinyl Chloride (PVC) ADHESIVE Uraplast Polymeric Plasticizers Do you manufacture soft PVC products that need to meet high demands with regard to migration, extraction, UV and heat resistance? Uraplast polymeric plasticizers are capable of meeting these demands. DSM Composite Resins is a leading European supplier of polymeric plasticizers. We offer a comprehensive range of plasticizers for PVC, elastomers, adhesives, coatings and other applications. Phthalic acid based polymeric plasticizers are resistant to water and have a high resistance to oil and fat. Adipic acid based polymeric plasticizers are highly resistant to oil and fat and perform very well in outdoor applications because of their UV-resistance. The excellent properties of polymeric plasticizers make them the material of choice for contact with foodstuffs, beverages and chemicals, as well as for temperature and stain resistant applications. Uraplast S 5640 is a very high viscous polymeric plasticiser based on adipic acid. The approximate average molecular weight (Mn) is 4500. Uraplast S 5640 is a polymeric plasticiser for self adhesive foils and tapes and for conveyor belts that need to be very resistant to fat, oil or fuel. Uraplast S 5640 has a very low migration tendency to other plastics, and volatility of plasticiser from PVC is very low. The resistance to oil and petrol is outstanding. Uraplast S 5640 is very high viscous. Prior to processing, it is recommended to lower the viscosity of this plasticiser by heating it up. Very high viscous polymeric plasticiser based on adipic acid. Used for self adhesive foils and tapes. Possesses very low migration tendency to other plastics. Provides very low volatility and very good resistance to fat, oil and fuel.