Tego RC 711 Silicone acrylate Degussa-Goldschmidt Adhesion Promoters >> Silicone & Silicone-Modified Polymer Release Agents ADHESIVE >> Radiation Curing (UV/EB) TEGO ® RC 711 is a solvent-free silicone acrylate for paper and film release coatings. TEGO ® RC 711 is used in combination with other TEGO ® RC Silicones as an adhesion promoter as well as to control the relevant release levels. When used on its own, TEGO ® RC 711 yields release coatings with high release values. TEGO ® RC 711 mainly serves as an anchorage additive for all mixtures with TEGO ® RC Silicones with easy or controlled release values and is used for the manufacturing of release coatings for self adhesive products, like e. g. Self adhesive labels Self adhesive tapes Hygiene products and many more. TEGO ® RC 711 shows excellent ageing characteristics even with self-crosslinking adhesives. Combined with other TEGO ® RC Silicones, namely those of the "easy" and "controlled" release types, TEGO ® RC 711 works as an anchorage provider and enables the controlled increase of the relevant release properties. TEGO ® RC 711 can be cured by either electron beam or ultra violet radiation (UV curing requires the addition of a suitable photoinitiator). To guarantee a good anchorage on the relevant substrate surface, an addition level of min. 30 % of TEGO ® RC 711 is added without interfering with the relevant easy or controlled release properties. Higher levels (more than 30 % TEGO ® RC 711) will allow the controlled increase of the release values. The recommended dosage is dependent on the type of adhesive used. When used in combination with other TEGO ® RC Silicones, stirring is necessary prior to application. Solvent-free silicone acrylate. Used as an adhesion promoter, as an anchorage additive and for the manufacturing of release coatings for self adhesive products, such as self adhesive labels, tapes and hygiene products. Provides high release values and very good ageing characteristics. Can be cured by either electron beam or ultraviolet radiation.