TPSiV 3011-60A Thermoplastic silicone vulcanizate Dow Corning-Multibase Silicone (Si) SEALANT >> Pre-formed tape / Gasket TPSiV is a Thermoplastic Silicone Vulcanizate. These materials are alloy type thermoplastic elastomers (TPEs) consisting of fully cured silicone particles dispersed in a continuous phase of engineering thermoplastic. They combine the high temperature elastomeric performance of silicone rubber with the melt re-processability and thermal and chemical resistance of engineering thermoplastics. TPSiV materials have a wide range of hardness, from 50 Shore A to 60 Shore D, excellent high temperature performance in air, excellent abrasion resistance, excellent resistance to chemicals including fuel and oil, as well as low compression set and tensile set at elevated temperatures. The TPSiV™ 3000 series materials offer a unique combination of high-temperature performance, oil and chemical resistance, softness, and high elasticity "all in one" formulation. These materials also offer high performance under harsh environmental conditions, and resistance to extreme temperatures, abrasion and chemical attack. TPSiV™ 3011-60A is a high performance TPE with an excellent soft, silky "feel" without plasticizers. Internally conducted sensory analysis shows that 3011-60A is warmer and less stiff, tacky, and rough as well as "quieter" (less noisy) than competitive TPEs and copolymers. This grade is particularly suitable for applications in the sports and leisure, furniture and electronics markets. Plasticizer-free, high preformance, fully cured silicone particles dispersed in a continuous phase of engineering thermoplastic. Used in seals and gaskets. Offers high temperature elastomeric performance, melt re-processability, thermal and chemical resistance, very good high temperature performance in air, abrasion resistance, resistance to chemicals including fuel and oil, low compression set and tensile set at elevated temperatures. Provides very good softness, high elasticity, low stiffness, tack, roughness and noise.