Viton GF-300 fluoroelastomer Dupont Dow Elastomers Fluoropolymers SEALANT ADHESIVE In adhesives applications, Viton forms a strong bond that can flex without failure after repeated temperature cycling and vibration. Terpolymer of vinylidene fluoride, hexafluoropropylene and tetrafluoroethylene, plus cure site monomer Viton GF-300 fluoroelastomer is a peroxide curable fluoroelastomer. It combines the excellent fluids resistance found in Viton GF with the improved flow of a lower viscosity polymer. Viton GF-300 is designed for transfer and injection molding of sealing devices. Viton GF-300 can be blended with other peroxide curable fluoroelastomers to provide variations in processing, properties, and shrinkage. Viton GF-300 features: Improved processability – lower viscosity, better mold flow – faster cure rate – better mold release Similar resistance to steam, acid, and aggressive engine oils Good compression set resistance for low viscosity type Viton Peroxide-curable terpolymer of vinylidene fluoride, hexafluoropropylene and tetrafluoroethylene. Combines high fluids resistance with improved flow of a lower viscosity polymer. Designed for transfer and injection molding of sealing devices. Can be blended with other peroxide curable fluoroelastomers to provide variations in processing, properties, and shrinkage. Forms a strong bond that can flex without failure after repeated temperature cycling and vibration in adhesives applications.