Viton GFLT-600 Fluoroelastomer Dupont Dow Elastomers Fluoropolymers SEALANT ADHESIVE In adhesives applications, Viton forms a strong bond that can flex without failure after repeated temperature cycling and vibration. Terpolymer of perfluoromethyl vinyl ether, vinylidene fluoride, and tetra fluoroethylene, plus cure site monomer Viton GFLT-600 fluoroelastomer is a peroxide curable fluoroelastomer. It combines high fluids resistance and low-temperature flexibility with the improved flow of a lower viscosity polymer. Viton GFLT-600 is designed for compression and transfer molding of sealing devices such as O-rings and gaskets. Viton GFLT-600 features: Improved processibility – lower viscosity, improved mold flow – better mold release Similar fluids resistance and low temperature flexibility Viton GFLT-600 is recommended for sealing applications such as fuel systems (especially fuel/alcohol blends and “oxygenated” fuels), oil seals (SF/SG oil resistance), and static seals that must seal at –40°C (–40°F) and have improved fluids resistance over standard FKM polymers. Also for compression or transfer-molded O-rings, gaskets, and diaphragms. Peroxide-curable terpolymer of perfluoromethyl vinyl ether, vinylidene fluoride, and tetrafluoroethylene. Combines high fluids resistance and low-temperature flexibility with the improved flow of a lower viscosity polymer. Designed for compression and transfer molding of sealing devices. Forms a strong bond that can flex without failure after repeated temperature cycling and vibration in adhesives applications.