Viton GLT-505 Fluoroelastomer Dupont Dow Elastomers Fluoropolymers SEALANT ADHESIVE In adhesives applications, Viton forms a strong bond that can flex without failure after repeated temperature cycling and vibration. Terpolymer of perfluoromethyl vinyl ether, vinylidene fluoride and tetrafluoroethylene, plus cure site monomer and process aid Viton GLT-505 is a new generation, peroxide curable fluoroelastomer. It combines the excellent fluids resistance and low temperature flexibility with the improved flow of a lower viscosity polymer. Viton GLT-505 is designed for compression and transfer molding of sealing devices such as O-rings and gaskets. Viton GLT-505 features: Improved processibility – incorporated process aid – lower viscosity, improved mold flow – better mold release Equivalent fluids resistance and low temperature flexibility Viton GLT-505 is recommended for static and dynamic sealing applications where a broad temperature service range is required. Its excellent low temperature properties over standard FKM polymers makes it ideally suited to applications where low temperature flexibility is needed. Also for compression or transfer molded O-rings, gaskets, and diaphragms. Peroxide curable terpolymer of perfluoromethyl vinyl ether, vinylidene fluoride and tetrafluoroethylene, plus a process aid. Combines the high fluids resistance and low temperature flexibility with the improved flow of a lower viscosity polymer. Designed for transfer and injection molding of sealing devices. Forms a strong bond that can flex without failure after repeated temperature cycling and vibration in adhesives applications.