Translink HF-900 Aluminosilicate Engelhard Extenders / Fillers >> Aluminium silicate Epoxy (EP) Aminoplaste & Phenoplastes (UF, MUF...) Polyamides (PA) Polyesters Rubber - Elastomer (Chloroprene, Butyl …) SEALANT >> Pre-formed tape / Gasket Translink® calcined and surface-treated aluminosilicates Translink aluminosilicates are high-performance reinforcing extenders designed to improve performance and strength in a wide range of polymer systems for plastics, rubber, coatings, and sealants. Generally, Engelhard Translink kaolin-based reinforcements improve polymer performance by providing: Improved processing and dispersion Enhanced mechanical strength Improved impact and flexural strength Improved electrical insulative properties High hydrophobicity Improved durability Specific Uses In the highly competitive global automotive market, many plastics are now formulated using Translink reinforcements to help compounders achieve a balance of performance characteristics difficult to obtain with unfilled plastics or other mineral reinforcements. And in rubber applications, Translink aluminosilicates provide high strength, as well as electrical, moisture and high tear strength in such products as power cable and accessories, insulating apparel, gaskets and thermoplastic elastomers (TPE). In coatings and sealant applications, Translink products improve barrier properties and increase water resistance and physical strength without adhesion loss. Translink HF-900: fine, higher aspect ratio particle size, high-brightness, premium performance grade designed for use in nylon, polyester epoxy, phenolic and other polar polymeric applications where better flexular modulus is required. Calcined and surface-treated aluminosilicate. Possesses fine, high aspect ratio particle size, high brightness. Used as a very high-performance reinforcing extender in a wide range of polymer systems for gaskets and sealants. Offers improved processing, dispersion, impact and flexural strength, electrical insulative properties and durability, enhanced mechanical strength and high hydrophobicity. Provides high moisture and tear strength in gaskets. Improves barrier properties and increases water resistance and physical strength without adhesion loss in sealants. Suits for use in nylon, polyester epoxy, phenolic and other polar polymeric applications.