Nuocide 404-D Tetrachloroisophthalonitrile International Specialty Products Preservatives / Biocides / Fungicides Acrylics/ Acrylates Polyvinyl acetate emulsions & derivatives (PVAc…) ADHESIVE >> Water-based SEALANT ADHESIVE >> Solvent based >> Contact adhesive NUOCIDE® 404-D Most cost-effective fungicide for water-based coatings. Dispersed form of NUOCIDE® 960. Used for non-food contact adhesives, grouts, stains, caulks, sealants, joint compounds and wood preservative stains. Tetrachloroisophthalonitrile NUOCIDE® 404-D is a broad-spectrum microbicide for the control of mildew and fungi. This flowable form of NUOCIDE® 960 provides excellent performance characteristics when used as a fungicide/mildewcide in aqueous paints, coatings, adhesives, caulks, sealants, grouts, joint compounds and wood preservative stains. Thermally stable under normal storage temperatures. Chemically stable in alkaline (less than pH 9) or acidic conditions. Stable to ultraviolet radiation. Aqueous Adhesives, Caulks and Sealants NUODCIDE® 404-D can be added to aqueous adhesives to provide fungal protection. Generally, 0.12 to 1.25 pounds of NUOCIDE® 404-D per 100 pounds (0.12% to 1.25% wt/wt) will provide adequate protection depending on fungal and mildew hazard and duration of protection desired. NUOCIDE® 404-D can be added to aqueous caulks and sealants to provide fungal protection. Generally, 0.25 to 1.25 pounds of NUOCIDE® 404-D per 100 pounds (0.25% to 1.25% wt/wt) will provide adequate protection depending on fungal and mildew hazard and duration of protection desired. Tetrachloroisophthalonitrile. Used as a broad-spectrum fungicide/mildewcide for non-food contact adhesives, aqueous adhesives, caulks and sealants. Offers control of mildew and fungi, very good performance characteristics, thermal stability, chemical stability in alkaline and acidic conditions and ultraviolet radiation stability. Use level: 0.12-1.25%wt.