Sukorez D-390 Hydrogenated DCPD resin 69430-35-9 Kolon Chemical Tackifier >> Hydrogenated hydrocarbon resin >> Aliphatic / Aromatic >> DCPD / Aromatic Rubber - Elastomer (Chloroprene, Butyl …) Ethylene co-terpolymers - solid (EVA, EMA...) ADHESIVE >> Hot-melt ADHESIVE >> Hot-melt >> Pressure sensitive (HMPSA) ADHESIVE >> Solvent based >> Pressure sensitive (PSA) Good compatibility with EVA PP Film Modification SUKOREZ has good compatibility with PP, therefore it can produce good properties of PP film such as stiffness, haze, air barrier property and heat sealing property. Sukorez D-390 is an aromatic modified hydrogenated DCPD hydrocarbon resin produced by Kolon chemical Co, Ltd. This grade has good compatibility with EVA and SBC, especially SBS because of its aromaticity. Sukorez is generally used for hot melt adhesive, hot melt pressure sensitive adhesive and solvent based pressure sensitive adhesive. SUKOREZ is used for water-proof agent because this material has good water resistant property. The uses of SUKOREZ series are authorized by the following FDA regulation. Adhesive, components of paper and paperboard in contact with Aqueous and fatty foods, components of paper and paperboard in contact with dry foods Sukorez is a water-white, H-DCPD C5 hydrocarbon resin made by KOLON CHEMICAL CO. It was developed for the premium performance as a tackifier resin for hot melt pressure sensitive adhesive (HMPSA) and solvent PSA. Several grades with varying softening points can be offered for the optimum application and favorable operation in Sukorez series. Key characteristics are: Excellent Initial Color (APHA 30) Excellent Color Stability to Heat and UV Good Compatibility with EVA and SBC Low Volatility and Low Odor No Skin Formation under Heat SUKOREZ D-390 is an aromatic modified hydrogenated DCPD hydrocarbon resin produced by KOLON CHEMICAL CO.,LTD. This grade has good compatibility with Ethylene Vinyl Acetate(EVA) and Styrene Block Copolymer, especially Styrene-Butadiene Copolymer(SBS) because of its aromaticity. SUKOREZ D-390 is generally used as tackifier resin for Hot Melt Adhesive (HMA), Hot Melt Pressure Sensitive Adhesive(HMPSA) and Solvent Based Pressure Sensitive Adhesive. Aromatic modified hydrogenated DCPD hydrocarbon resin. Possesses low volatility, low odor and very good color stability to heat and UV. Offers good compatibility with EVA and styrene block copolymer (SBS). Provides stiffness, haze, water resistance, air barrier and heat sealing properties. Used in hot melt adhesives, hot melt pressure sensitive adhesives and solvent PSA.