Tafigel PUR 60 Polyurethane Munzing Rheology Modifiers / Thickeners >> Urethane (HEUR) ADHESIVE >> Water-based Rheology modifier for aqueous systems Non-ionic polyurethane in butyltriglycol/water TAFIGEL PUR 60 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 60 provides strong pseudoplastic rheological profile with excellent shear thinning characteristics. It can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. TAFIGEL PUR 60 is designed for use in industrial coatings. It is also recommended for following systems: interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers. Advantages of using TAFIGEL PUR 60: high sag resistance good flow, leveling and gloss excellent atomization for spray application can be used over a wide pH range The performance of polyurethane thickeners is affected by many factors including binder type, co-solvents, coalescing agents, surfactants/wetting agents, pigments and flattening agents. The interactions of TAFIGEL PUR 60 with these compounds allow varied possibilities for rheology adjustment. Normal dosage ranges from 0.3 - 2 % on total formulation. heat sealing, emulsion and emulsion tile adhesives Non-ionic polyurethane thickener. Used as a rheology modifier for aqueous systems such as heat sealing, emulsion and emulsion tile adhesives. Provides strong pseudoplastic rheological profile, very good shear thinning characteristics, high sag resistance, good flow, leveling and gloss, very good atomization for spray application and efficiency over a wide pH range. Can be used alone or in combination with other thickeners. Use level: 0.3-2 % on total formulation.