Nanopox XP 22/0314 Nanoparticle reinforced epoxy resin Procachem Epoxide (EP) ADHESIVE Nanosilica Reinforced Epoxy Resins Under the trade name NANOPOX we offer silica nanoparticle reinforced epoxy resins showing an outstanding combination of material properties. The silica phase consists of surface-modified, synthetic SiO2-nanospheres with less than 50 nm diameter and extremely narrow particle size distribution. These nanospheres are agglomerate-free dispersed in in the resin matrix resulting in a low viscosity for resins containing up to 50 wt-% silica. lower viscosity of your formulation in comparison with common reinforcing fillers and a complete suppression of sedimentation increased fracture toughness, impact strength and modulus improved scratch- and abrasion resistance reduced shrinkage upon curing and reduction of the coefficient of thermal expansion improved dielectric properties improvement or at least no compromising influence of usual favourable properties like: temperature resistance, chemical resistance, glass transition temperature, durability and weathering stability by combination of NANOPOX with conventional fillers like quarz the resin content can be reduced and the total filler content can be increased to so far unknown levels processing characteristics remain virtually unchanged compared with the basic resin adhesives Surface-modified, synthetic, silica nanoparticle reinforced epoxy resin. Used in adhesives. Provides lower viscosity, increased fracture toughness, impact strength and modulus. Offers improved scratch- and abrasion resistance and dielectric properties, reduced shrinkage upon curing and reduction of the coefficient of thermal expansion. Gives improvement or at least no compromising influence of usual favourable properties such as temperature and chemical resistance, glass transition temperature, durability and weathering stability.