Rhenosin C 30 Coumarone-indene resin Rhein Chemie Tackifier >> Coumarone indene Rubber - Elastomer (Chloroprene, Butyl …) Rhenosin® resins bring about specific imrovements in compounding, processing and vulcanisate properties. They: Improve the tack of green compounds Promote filler incorporation Enhance consistency Reduce compound viscosity Improve compound homogenity Enable high Shore hardnesses to be obtained Enhance the physical properties of vulcanizates, e.g. by improving the wet skid properties of tyres Rhenosin® C 30 Dispersing and tackifying resin for solid rubbers and bonding solutions; aromatic extract substitute for diene rubber compounds Coumarone-indene resin; polymerisates of carbon-derived, unsaturated aromatic C9/C10 hydrocarbons Rhenosin C 30 improves the tack of green diene rubber mixes based on NR, SBR and BR. Rhenosin C 30 has no effect on the vulcanization characteristics of the diene rubber mix. In combination with coumarone-indene resins, which have a higher softening point (e.g. Rhenosin C 100), physical properties such as modulus, tensile strength, elongation at break and compression set, and dynamic properties such as non-skid properties and high speed characteristics can be improved. In combination with naphthenic plasticizers, Rhenosin C 30 can be used as a substitute for aromatic compounds does not diminish the physical properties of the finished article. 1 - 10 phr Truck tyres, passenger car tyres, tyres for industrial and agricultural applications, tyre retreads, conveyor belts, V-belting, bonding solutions for technical articles Coumarone-indene resin. Used as a dispersing and a tackifying resin for solid rubbers and bonding solutions. Improves green tack of diene rubber mixes based on NR, SBR and BR, modulus, tensile strength, elongation at break and compression set, and dynamic properties. Can be used in combination with naphthenic plasticizers as a substitute for aromatic compounds. Use level: 1-10 phr.