Novares C 140 Indene coumarone Rütgers Chemicals Tackifier >> Coumarone indene Ethylene co-terpolymers - solid (EVA, EMA...) ADHESIVE >> Hot-melt ADHESIVE >> Hot-melt >> Pressure sensitive (HMPSA) ADHESIVE >> Solvent based aromatic hydrocarbon resins to adjust specific EVA compatibility, endblock modifying resins (SIS-/SBS copolymer) Indenene coumarone resin used in hot melt adhesives, e.g. edge handing, surface edge lamination, profile wrapping. It improves heat resistance, adhesion and application rate. adjustment of hot tack and of rheology adjustment of open time adjustment of EVA compatibility improved resistance to water and chemicals Used also in solvent based Adhesives .must show high initial tack and a good resistance to ageing (e.g. assembly adhesives). Parquet adhesives have to give low swelling and good shear resistance. Additionally low viscosity at high solid content is important. NOVARES resins offer the following advantages: improved adhesion to the substrates and heat resistance increased thermoplastic character lower processing viscosity adjustment of open time allowing the use of acid or basic pigments and fillers in processing Coumarone indene resin. Used as a tackifyer in hotmelt, pressure sensitive and solvent-based adhesives. Improves adhesion and application rate and heat, shear, water and chemical resistance.