Capa FB100 Caprolactone polymer Solvay Caprolactones Polycaprolactones, thermoplastic ADHESIVE CAPA® FB100 is a film grade thermoplastic polycaprolactone. It has been specifically designed to be processed on conventional film blowing equipment. It is supplied as a 100% resin and can be used in a variety of blown film and adhesive applications. Caprolactone polymer CAPA® FB grades are unique polycaprolactone thermoplastics, which have specifically been designed for conversion into blown film on conventional equipment. These can be used in high performance laminating adhesives. Typical end uses are: Shoe Counters Binder for Non-wovens Paper Laminates The benefits provided by CAPA® products are: Excellent adhesion to leather and other difficult substrates. Low temperature activation. Reactivated by heat, no solvent needed. Biodegradable. Non-toxic. Crystalline, rigid polymer with high elongation. Polar polyester easily pigmented or coloured. Compatible with wide range of polymers. Hydroxyl groups allow sites for reaction. Low melt viscosity allows ease of application and penetration into substrate. Low Tg gives good low temperature performance. CAPA® thermoplastics can also be converted to cast or blown film for use in laminated adhesive film Thermoplastic polycaprolactone. Designed to be processed on conventional film blowing equipment. Can be used in a variety of blown film and adhesive applications (high performance laminating adhesives). Provides very good adhesion to leather and other difficult substrates. Offers compatibility with a wide range of polymers. Applications : shoe counters, binder for non-wovens, paper laminates