Vylon GM-925 Crystalline copolyester Toyobo Vylon Polyester ADHESIVE >> Hot-melt Highly polymerized copolyester resins which have crystalinity. For its various crystallizing properties, this product is used as hot melt adhesive for pasting many substances. Especially, it shows excellent adhesion to films and formed products such as polyester, vinyl chloride and polycarbonate and metals such as aluminum and iron. Because of their variety of crystallizing properties, crystalline copolyester grades of Toyobo VYLON are used extensively as hot melt adhesive. This adhesive can be used by extruding, dipping and other hot melt coating methods. The hot melt type resin has the following excellent features as compared to the conventional solvent-based adhesives and water-based adhesives. Drying process is not necessary. Since solvent or water is not contained, drying oven is not necessary. Also, there is no need to install solvent recovery unit, etc. As compared to conventional dry lamination process, etc., the equipment can be made compact by eliminating drying process, and in turn to yield improved productivity. Resins friendly to the environment Since solvent or water is not contained, it is entirely unnecessary to worry about air pollution or water pollution in the production process. Can be hardened quickly at normal temperature. After coating in the melted condition, the adhesive strength and the heat resistance is to be improved as the crystallization is progressed No need to worry about the pot life. Since hardener such as isocyanate or epoxy is not necessary, there is no need at all to worry about the pot life. Good workability The resin is solid. It is odorless, easy to handle, and the work efficiency and the working environment is to be improved. Highly polymerized odorless copolyester resin. Used in hot melt adhesives. Provides adhesion to films and formed products such as polyester, vinyl chloride and polycarbonate and metals such as aluminum and iron. Offers transparency, adhesive strength and heat resistance.