Uvacure 1534 Modified cycloaliphatic epoxide UCB Chemicals Epoxide (EP) ADHESIVE >> Radiation Curing (UV/EB) Uvacure Modified Cycloaliphatic Epoxides are designed to provide properties not achievable with conventional cycloaliphatic epoxies. See Table III. Benefits of this class of materials include enhanced flexibility, improved toughness, and better chemical resistance of cured films containing these materials. These products, having exceptionally low color, may offer even higher cure response, reduced susceptibility to atmospheric humidity, and even better adhesion. 1534 Modified cycloaliphatic epoxide for good flexibility, water resistance, and excellent toughness Laminating Adhesive Table XII gives a suggested starting point formulation for a laminating adhesive for substrates which are not transparent to UV light. Lamination can be done immediately after UV exposure. Cure dosage was 35-75 mJ/cm2. Full cure properties are developed after 60 minutes. The formulation exhibits good adhesion to polyethylene, polyester, bi-oriented polypropylene, polycarbonate, aluminum, and steel. Modified cycloaliphatic epoxide. Used in cationic curing formulations such as laminating adhesives. Provides enhanced flexibility, improved toughness, better chemical resistance, low color, higher cure response, reduced susceptibility to atmospheric humidity and good adhesion to polyethylene, polyester, bi-oriented polypropylene, polycarbonate, aluminum, and steel. Offers water resistance and very good toughness.